Get In Touch

Latest News

Visit Our Blog
19 Dec 2018

Antenna evaluation method could help boost 5G network capacity and cut costs



Researchers at the National Institute of Standards and Technology (NIST) have developed a method for evaluating and selecting optimal antenna designs for future fifth-generation (5G) cellphones, other wireless devices and base stations.

The new NIST method could boost 5G wireless network capacity and reduce costs.

5G systems will avoid crowded conventional wireless channels by using higher, millimeter-wave frequency bands. Transmissions at these frequencies lose a lot of energy along the way, which weakens received signal strength. One solution is “smart” antennas that can form unusually narrow beams — the area in space where signals are transmitted or received — and rapidly steer them in different directions.

Antenna beamwidth affects wireless system design and performance. NIST’s new measurement-based method allows system designers and engineers to evaluate the most appropriate antenna beamwidths for real environments.

“Our new method could reduce costs by enabling greater success with initial network design, eliminating much of the trial and error that is now required,” NIST engineer Kate Remley said. “The method also would foster the use of new base stations that transmit to several users either simultaneously or in rapid succession without one antenna beam interfering with another. This, in turn, would increase network capacity and reduce costs with higher reliability.”

This is the first detailed measurement-based study of how antenna beamwidth and orientation interact with the environment to affect millimeter-wave signal transmission. In the technique, NIST measurements covering a broad range of antenna beam angles are converted into an omnidirectional antenna pattern covering all angles equally. The omnidirectional pattern can then be segmented into narrower and narrower beamwidths. Users can evaluate and model how antenna beam characteristics are expected to perform in specific types of wireless channels.

An engineer could use the method to select an antenna that best suits a specific application. For example, the engineer may choose a beamwidth that is narrow enough to avoid reflections off certain surfaces or that allows multiple antennas to coexist in a given environment without interference.

To develop the new method, the NIST team collected experimental data in a hallway and lobby of a NIST research building, using a special robot loaded with a customized channel sounder and other equipment. A channel sounder collects data that capture the signal reflections, diffractions and scattering that occur between a transmitter and receiver. Many such measurements can be used to create a statistical representation of the radio channel, to support reliable system design and standardization.

NIST study results confirm that narrow beams can significantly reduce signal interference and delays, and that an optimized beam orientation reduces energy loss during transmissions. For example, the time interval during which signal reflections arrive (a metric called RMS delay spread) dropped dramatically from 15 nanoseconds (ns) to about 1.4 ns as antenna beamwidth was reduced from omnidirectional (360 degrees) to a narrow 3 degrees or so-called pencil beam.

Future research will include extending the method to different environments and analysis of other wireless channel characteristics.

Story Source:

Materials provided by National Institute of Standards and Technology (NIST). Note: Content may be edited for style and length.


Microtechs 24×7 White Label Support Services

Based in Surrey, Microtechs are an established and specialised support centre providing 24×7 outsourced helpdesk and NOC monitoring solutions to businesses on a completely white labelled basis.

Are you set for the New Year? Perhaps it’s a good time to consider what savings you could achieve through outsourcing with Budget reviews approaching.

Benefits of using our white labelled service:

•Fully inclusive services with an average 80% resolution rate
•A dedicated and skilled team ready to give you a hand at busy periods
•Desktop / Network / O365 / Mac / Telecoms / Bespoke software / Wi-Fi
•A cost effective and scalable solution
•A seamless extension to your current support team
•Fully staffed 24/7 for those clients who need Out of Hours support

Benefits of working with Microtechs:

•We are not a massive call centre operation, we are family run, with a great team of staff who are experienced at both customer service and technical support.
•We work very closely with our clients to provide a service that compliments existing support models.
•Our operation is well practiced, and we can provide elevated levels of service to all end users.
•We can be extremely bespoke to you and your customers support requirement.

What next:

If you would be interested to find out some more, then please get in touch with a member of our solutions team, who can talk you though our offering. Please contact us for further information on 01483 407417.




More About Us