24/7/365 TECHNICAL HELPDESK
NETWORK OPERATIONS CENTRE
DIRECT I.T. SUPPORT
DON'T SEE THE SERVICE FOR YOU?
Get In Touch

Latest News

Visit Our Blog
14 Mar 2017

Telecoms Jargon Buster

Share:

 

Continuing Microtechs look at the telecoms sector, we thought it would be useful to better understand some of the frequently used terminology encountered on our service desk. Here we can understand your ADSL from your WAN.

 

 

 

ADSL

 

Stands for ‘Asymmetric Digital Subscriber Line’. ADSL transforms the existing twisted copper pairs between the telephone exchange and the telephone socket into a high-speed digital line, allowing Broadband access. ADSL delivers fast download speeds but slow upload speed.

 

 

 

Auto Attendant

 

An automated system designed to guide a caller through the options of a voice menu. Typically set to answer and route incoming calls.

 

 

 

Bandwidth

 

The capacity of a telecom line to carry signals. The necessary bandwidth is the amount of spectrum required to transmit the signal without distortion or loss of information. FCC rules require suppression of the signal outside the band to prevent interference.

 

 

 

Broadband

 

A term used to describe fast internet access. Wide bandwidth which can be either ADSL or SDSL. ADSL can suffer from vast bandwidth changes (see also Contention Ratio).

 

 

 

Call Hold

 

A service feature that enables a user to retain an existing call, while accepting or originating another call using the same handset or phone device. The held call is tied to the handset that placed the call on hold and, therefore, can only be taken out of hold from the same handset.

 

 

 

Call Park

 

A service feature that allows a user to place an active call on ‘hold’ at one telephone handset and then retrieve the call, from any other handset within the same phone network. The call is effectively placed in a ‘parking bay’ and is allocated a parking bay number, e.g. 101. Users can then pick up another handset on the same network and type in the bay number to retrieve the held call. 

 

 

 

Call Transfer

 

A service feature that allows a user to place a call on hold whilst, simultaneously, transferring the call to another destination. The destination can typically be both an internal or external telephone.

 

 

 

Contention Ratio

 

A term used to describe the number of individual broadband customers connecting to a single internet node at the local public exchange. High contentions ratios will cause vast speed differences depending on time of day and number local users on line.

 

 

 

Convergence

 

Historically, Voice & Data networks were kept entirely separate. However in recent years, changes in technology have meant that many businesses can now run both voice and data over the same LAN, thereby causing them to ‘converge’. Cost savings are one benefit of Convergence but far more importantly there are significant productivity and efficiency gains to be achieved. VOIP, IP Telephony, Unified Messaging, Remote Working etc. all come under the ‘Convergence’ umbrella.

 

 

 

DDI

 

Stands for ‘Direct Dial Inbound’ – allows users to rent individual phone numbers without the need to rent individual lines. DDI’s are mapped onto specific ISDN lines and the PBX is then programmed to direct the incoming DDI call to the specific extension or hunt group as required. Customers can rent a large volume of DDI’s whilst benefiting from renting an optimum number of lines based on required usage.

 

 

 

DECT

 

Stands for ‘Digitally Enhanced Cordless Telecommunications’. A technology used to link cordless mobile handsets to a wired telephone system.

 

 

 

Ethernet

 

A very common method of networking computers in a LAN. An ‘Ethernet’ describes the physical network that carries data traffic.

 

 

 

Feature line

 

A BT specific service running over the PSTN. Designed for small companies (typically max 3 users), it is a dated product that provides limited basic PBX functionality requiring one dedicated phone line per user. Feature line is not considered to be cost effective for 4 or more users.

 

 

 

Fibre to the Cabinet (FTTC)

 

This is a generic term for any broadband service that uses fibre optic cable, in place of traditional copper wiring, to connect a telephone exchange to the ‘green cabinets’ in the surrounding roads. This means that copper wires are only used in the last few hundred metres between a green cabinet and a customer’s premises. Unlike copper, fibre does not suffer from signal loss over distance and so provides much faster download and upload bandwidth speeds.

 

 

 

Hosted Telephony / Hosted VoIP


An IP based phone system that is “Hosted” in a data centre. Customer sites connect to the hosted phone system via an internet connection that is generally either ADSL or SDSL but can be a leased line. All the intelligence of the phone system is held within the data centre and the onsite equipment is controlled by the central system. Customer communication profiles are configured via a simple web based browser and individual users can control their own phone profile from any internet connection, with ease. Hosted Telephony is particularly beneficial for companies with two or more sites and can be used internationally. All calls made between customer sites are FREE.

 

Hunt Group

 

Multiple phones allocated to a single DDI or extension number, thereby enabling an inbound call to be answered from any phone, within the allocated group of phones. I.e. accounts or sales depts. etc. Inbound calls can be configured to ‘hunt’ from one phone to another (until answered) or to be “broadcast” across all phones in the group, so they all ring at once.

 

 

 

ICT

 

Stands for ‘Information and Communication Technology’. Equipment such as computers, the Internet, CD-ROMS and other software.

 

 

 

IP

 

Stands for ‘Internet Protocol’. A standardised method of transporting information across the Internet in packets of data. It is often linked to Transmission Control Protocol, which assembles the packets once they have been delivered to the intended location.

 

 

 

IP Telephony (also see Hosted Telephony)

 

Using Internet Protocol as a method of carrying voice calls. With IP, voice communications (in the form of IP packets) are routed directly from the origin to destination devices.

 

 

 

ISDN (provided in two formats as per below)

 

Stands for ‘Integrated Services Digital Network’. Digital telephony service that gives better call quality, quicker connection times and DDI facilities. ISDN is generally provided to connect to a customer’s PBX. ISDN can also be used in Radio and was historically used for faster Internet connection before the advent of broadband.

 

 

 

ISDN2e

 

Provided in pairs i.e. 2 channels/lines per ISDN2e. The majority of customers would get a maximum of 4 pairs before moving up to ISDN30e. The e stands for the European standard.

 

 

 

ISDN30e

 

Provided over one large circuit (bearer/pipe) either as copper or in many cases fibre optic. The minimum number of channels/lines one can have is 8 moving up to 30. Larger organisations can rent multiple ISDN30e’s should they require more lines. The e stands for the European standard.

 

 

 

LAN

 

Stands for ‘Local Area Network’ – Data network that connects computers, servers, printers etc. together, generally within one physical location.

 

 

 

Leased Line

 

Dedicated private internet access circuit – provides secure, fast and un-contended internet access.

 

 

 

MPLS

 

Stands for ‘Multi-Protocol Label Switching’ – A flexible and cost effective way of providing a WAN.

 

 

 

PBX aka PABX

 

Public (Automated) Branch Exchange aka Switchboard aka Phone System.

 

 

 

PSTN

 

Stands for ‘Public Switched Telephone Network’. This is the standard telephone service provided over basic analogue phone lines.

 

 

 

Router

 

A device (or, in some cases, software on a computer) that directs IP packets to the next point toward their destination.

 

 

 

SDSL

 

Stands for ‘Symmetric Digital Subscriber Line’. The same as ASDL but provides the same speed/bandwidth in both directions. Useful for companies needing to upload high bandwidth packets quickly. Common requirement with VOIP networks.

 

 

 

SIP

 

Stands for ‘Session Initiation Protocol’. It is essentially a communications protocol used to set up and clear down sessions with one or more users over the internet.  Can be used in a multitude of scenarios, but most common is in the initiation and termination of Voice over IP calls.

 

 

 

SIP Trunks

 

Basically an internet phone line.  Part of the broadband bandwidth is allocated solely for a VoIP call.  Each VoIP call requires one SIP trunk but a good quality broadband service can accommodate multiple SIP trunks.  SIP trunks are much cheaper to rent than traditional phone lines.

 

 

 

SLA

 

Stands for ‘Service Level Agreement’ – part of a service contract where the level of service is formally defined. In practice, the term SLA is sometimes used to refer to the contracted delivery time (of the service) or performance.

 

 

 

SMTP

 

Stands for ‘Simple Mail Transfer Protocol’. The standard Internet protocol for transferring electronic mail from one computer to another.

 

 

 

Unified Messaging

 

Enables you to access voice, fax, and text messages via one single email or telephone account.

 

 

 

VPN

 

Stands for ‘Virtual Private Network’ – A way of creating a private communications network over a public network (mostly the internet) using secure protocols.

 

 

 

VOIP (see Hosted Telephony)

 

Stands for ‘Voice over Internet Protocol’ – Voice translated into data packets and transmitted across an internet connection or network – just like any other file or email you might send. Upon reaching the other end data is transformed back into its original form and emerges like a regular phone call.

 

 

 

WAN

 

Stands for ‘Wide Area Network’ – Connects multiple LAN’s together, typically via VPN’s over broadband and/or Leased Lines

 

 

 

Microtechs provide support using out Technical Operations Centre, which is open 24/7/365, and our nationwide network of engineers. The centre is staffed by fully trained 1st and 2nd line support teams.


We can cover support in an overflow capacity, or handle your 1st and 2nd line calls to help cover busy periods or times of growth. Being 24/7, means we provide overnight and weekend support. We also support some telecoms companies by providing more IT related service.


The services we are able to provide include:

 

  • Supporting and proactively managing ADSL / PSTN networks.

     

  • Raising faults with supplies (E.g. Telstra Europe / BT Openzone / MDNX. We have full access to all major suppliers’ portals.

     

  • Performing 1st line CPE checks with customers (Troubleshooting / line testing).

     

  • We offer centralised role in fault management between supplier and customer.

     

  • Staff trained up to BSC MSC degree standard in Telecoms.

     

  • Staff trained in installation, sales and technical support for cloud networks, Cisco and Aerohive.

     

  • Staff trained in day to day management of Wi-Fi networks and experienced in installation and managing equipment including: HP, Mikrotik, Draytek, Zytel, Netgear and Meraki.

     

For more information – contact us on 01483 407417 or visit our website www.microtechs.co.uk

 

 

Author:

sales
Share:

ONE OF THE WORLD'S LEADING PROVIDERS OF OUTSOURCED I.T., BUSINESS & IN HOME TECHNOLOGY SERVICES.

More About Us